Powder coating is a durable, eco-friendly finishing process where a dry powder is electrostatically sprayed onto a metal surface, then cured with heat to form a hard, protective layer that's tougher and more uniform than conventional liquid painting
Differ from usual powder coating, which only provide anti-corrosion protection. S-CAS power coating integrates anti-corrosion and fire-resistant, and the whole process is prefabricated by an intelligent production line.
Start Your Project
|
|
Traditional painting | S-CAS Powder Coating | |
|
Environment |
Pollution |
Open spraying, 50% of the materials waste into the air |
Closed-booth, powder recollect, 99% utilization rate |
|
Occupational diseases |
Yes, huge risks |
No, closed production line |
|
|
VOC emissions |
lots of |
ZERO |
|
|
Efficiency |
In-factory |
Primer, intermediate and top painting, 3-7 days in factory |
1 hour: coating and curing, and ready for installation |
|
On-site |
another 7 days for on-site fire-resistant painting and curing |
||
|
Quality |
Coating material |
Solvent-based wet paints |
Dry powder |
|
Outdoor Structure |
Maintenance for every 5-6 years |
30 years maintenance-free |
|
|
Indoor Structure |
|
Same life as the building |
|
|
Fire-resistant |
3 hours |
More than 3 hours |
|
|
Thickness for fire resistent |
Around 4cm |
Around 0.25cm |
|
|
Inspection |
Difficult quality inspection on-site |
Easy quality control in-factory |
|
|
Cost |
Labor in-factory |
Lots of |
little labor |
|
Labor on-site |
Lots of, high cost |
No need |
|
|
full life cycle |
Lots of maintanence cost |
Once and for all |
|
